Main Drill Rig
|
Max. Feed Thrust/ Feed Pull
|
2450KN (550760 lbf) for this HDD Drill Rig
|
Feed Thrust/ Feed Pull System
|
Ⅰ shift :9 m/min (29.6 feet/min)
|
Ⅱ shift :28 m/min (91.9 feet/min)
|
Rotation Driving of the Geological Drill Rig
|
Gear transmission, step less speed regulating Ⅰshift hollow spindle torque:70000N·m(51590 lbf·ft) @42r/min Ⅱshift hollow spindle torque:35000N·m(25795 lbf·ft) @84r/min
|
HDD Drill Rig Motor
|
Manufacture power of Geological Drill Rig
|
Weichai Power equipped with this Geological Drill Rig
|
Rated Value
|
450KW (640HP)
|
Operational State
|
Dual Power System Working
|
Operator's Cab
|
Equipped with Air-conditioner
|
Dimension and Gross Weight
|
Dimension(L×W×H)
|
14.5×3.15×3m (47.6×10.3×9.8 feet)
|
HDD Drill Rig Gross Weight
|
44 T(97020 lb)
|
Mast Entrance Oblique Angle
|
8°—16°
|
Environmental Standard and Service
|
Engine Emissions and Noise Meeting EuropeanⅡ Standard
|
Drilling Tool for HDD Drill Rig
|
Drilling Rod Be Used
|
"5 1/2"
|
Reaming Shell for Geological Drill Rig
|
Ф325,Ф530,Ф660,Ф760,Ф900,Ф1100mm (Ф12.8,Ф20.9,Ф26.0,Ф29.9,Ф35.4,Ф43.3 inch)
|
Shackles
|
Clamp Holder Centering by Itself
|
Clamper /Break-out Tong
|
Distance adjustable with accurate, stable and reliable breaking-out
|
Max. Make-up Torque
|
90 KN·M (66330 lbf·ft)
|
Max. Break-out Torque
|
180 KN·M (132660 lbf·ft)
|
Crane On the Rig
|
3 T(6615 lb) Straight-arm Crane
|
Mast of HDD Drill Rig
|
Length could be adjusted according to client's requirements
|
Hydraulic Mud Pump
|
Full Hydraulic Driving, Flux Step less Adjustable.
|
Flux Rate of the Geological Drill Rig
|
0—1500 L/min(0-396 US Gallons/min)
|
Pressure of HDD Drill Rig
|
0—10 MPa (0-1450 psi)
|
Chassis
|
Track Assembly Type
|
Accessory for HDD Drill Rig
|
Pressure, flux rate, revolution and other more than ten dates will be shown in figures. This is easy for analysis and judgment of problems and condition in the performance process.
|