The Light Drill Tower and Derrick is a lightweight drilling derrick. This A-shaped tower has simple structure and can easy be erected. The two legs of the A-shaped tower are tubular or trussed type. They are suitable for drilling straight hole or inclined hole respectively. This Light Drill Tower and Derrick is mainly equipped with spindle-type drilling rig and water well drill rig. It used for lifting rod and casing pipe and is widely applied to petroleum drilling equipment. Nowadays, this Light Drill Tower and Derrick begins to be applied to geological and engineering drilling.
Features
1. Due to its light weight and simple structure, the A-shaped Drill Tower and Derrick is very easy to install and to transport.
2. Drill Tower and Derricks have gain state verification. They have large load capacity.
3. It is not only suitable for core drilling in geological prospecting, but also applicable for the exploration of water well, petroleum and natural gas.
4. The Light Drill Tower and Derrick is bound tightly with four steel wires (guy rope) in use. Guy rope is the key point to keep the stability of the drilling derrick.
Usage and Maintenance
1. When using the A-shaped derrick, users should check every bolt, joint of pin shaft, nut and pins regularly.
2. All pulleys and rotating parts of the Drill Tower and Derrick should be maintained and lubricated regularly to prevent oil shortage or rust.
3. When disassembling or hoisting the parts of the drilling derrick, operator should avoid bending the parts or deforming them. Operator should prevent the small accessories from dropping.
4. Maintainer should promptly treat the rusted parts of the Drill Tower and Derrick and protect them form corrosion.
Parameters
|
Nominal Height (m)
|
13
|
15
|
18
|
24
|
27
|
31
|
22
|
|
Length of Swing Stand (m)
|
9
|
9
|
13.5
|
17.5
|
17.5
|
17.5
|
17.5
|
|
Nominal Area of Base (m2)
|
4.5×4.5
|
4.5×4.5
|
4.5×6.4
|
6×6
|
6×6
|
7×1.2×2.2
|
4.2×5.15
|
|
Number of Pulleys
|
3
|
4
|
4
|
4
|
5
|
6
|
4
|
|
Load of Crown Block (t)
|
20
|
30
|
30
|
75
|
90
|
135
|
75
|
|
Weight (kg)
|
5000
|
5000
|
5800
|
13000
|
19000
|
41000
|
23000
|
Sells new, used wheel loaders, excavators, dozers, lift trucks, cranes (mobile, tower), concrete pump cars, compactors, hydraulic drills, compressors, more types; parts. Product overviews. Seoul, Korea. Owns two K-10000 tower cranes, available for prompt delivery. Worldwide tower crane vendors and hirers based in the UK.
Manufacturer of patented fine screening technology for wet and dry separations in mining and mineral processing, industrial minerals, chemical, construction aggregate, pulp and paper industries. Manufacturers of drill rod, casing, split spoon sampling equipment, sub adapters, core barrels and diamond/carbide coring bits. Lightweight ice core drills. Easy transportation, installation, operation. 2- and 3-inch drills.
Custom manufactures to specifications earth drilling tools, bits and related accessories, including hollow stem augers, solid augers, drilling bits. Manufactures hydraulic casing hammers built specifically for rotary machines, and cable-tool drill rigs. Rents, sells, and services hydraulic drills, breakers and drilling tools.
Provides machine tools to customers worldwide. Selection includes tool room and CNC lathes, horizontal and vertical mills, radial and upright drills. As well as Hydraulic shears. Fabricating services include drilling, turning, milling, grinding, and stamping. Equipment includes travelling column radial press with 36' x 8' table for handling above average sized components. Manufacturer of patented fine screening technology for wet and dry separations in mining and mineral processing, industrial minerals, chemical, construction aggregate, pulp and paper industries.
